Table of Contents
Advertisement
Programme Labels
Intelligent Picture
Manual Programme
Preset
Digital Set-up
Subtitle Set-up
Audio Set-up
54
GB
Assigns a channel name of your choice.
1
Press F/f to select the channel you want to name, then press
2
Press F/f to select the desired letter or number ("_" for a blank space), then
press g.
If you enter a wrong character
Press G/g to select the wrong character. Then, press F/f to select the correct
character.
3
Repeat step 2 until you finish entering the name.
4
Press
to exit the labeling procedure.
On with Indicator Automatically reduces the picture noise. The signal level bar
is displayed when the channel is changed or the display is
changed from an input screen to a TV programme.
On
Automatically reduces the picture noise.
Off
Turns off the "Intelligent Picture" feature.
To preset a channel, press PROG +/– to select the channel number.
~
• You cannot select a channel number that is set to "Skip" (page 54).
Programme
Select a channel number to tune manually.
System
Select a TV broadcast system.
Channel
Select "S" for cable channels or "C" for terrestrial channels.
AFT
Allows you to fine-tune the selected channel manually if you
feel that a slight tuning adjustment may improve picture
quality.
When "On" is selected, fine tuning adjustments are made
automatically.
Audio Filter
Improves the sound of individual channels when distortion
occurs in mono broadcasts.
~
• You cannot receive stereo or dual sound when "Low" or
"High" is selected.
Skip
Skips unused analogue channels when you press PROG +/–
to select channels. To select channels you have programmed
to skip, use the corresponding number buttons.
Signal Level
Displays the signal level for current programme.
Subtitle Setting
Displays visual aids for the hearing impaired with subtitles (if
available) by setting to "For Hard Of Hearing".
Primary
Select the most preferred subtitle language.
Preferred
Language
Secondary
Select the secondary preferred subtitle language.
Preferred
Language
Audio Type
Switches to broadcast for the hearing impaired when you
select "For Hard Of Hearing".
.
Advertisement
Table of Contents
