Introduction Table of Contents Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. Note • Before operating the TV, please read “Safety Information” (page 2). • Instructions about “Installing the TV to the Wall” are included within this TV’s instructions manual.
Page 3
• When transporting the TV set by hand, hold it as shown below. damage and/or injuries: Use only Sony supplied AC power cords (mains lead), not those Do not put stress on the LCD panel and the frame around the screen.
Page 4
Ask your dealer or Sony service centre to have it checked by • If the TV is placed in the changing room of qualified service personnel.
3D video images or playing and may cause damage to the TV set. stereoscopic 3D games. Sony recommends that all viewers take regular breaks while watching 3D video images or playing stereoscopic 3D games. The length and frequency of necessary •...
Page 6
WALL-MOUNT BRACKET • If you use the TV installed on the Wall-Mount Bracket for a long time, the wall behind or above the TV may become discoloured or the wallpaper may come unglued, depending on the material of the wall. •...
To connect with AV composite cables Connecting Other Devices To connect with an HDMI cable < 21 mm < 12 mm To VIDEO OUT To HDMI OUT To connect with component cables To AUDIO OUT To COMPONENT OUT (P Picture Quality •...
To Sony Dealers and Contractors Sufficient expertise is required for installing this product. Be sure to read this instruction manual thoroughly to do the installation work safely. Sony is not liable for any damages or injury caused by mishandling or improper installation.
Installing the Brackets on the wall Prepare necessary items. Wall-Mount Bracket accessories (supplied) Paper Template Wall-Mount Base Stand Protector Screw (+PSW 6 × 12) (2) KDL‐50W800B KDL‐50W800B KDL-42W800B, KDL-42W800B, KDL‐42/32W700B (1) KDL‐42/32W700B (1) Spacers (2) Bracket Cap Plate Screw (+PSW 4 × 10) KDL‐50W800B KDL‐50W800B KDL-42W800B,...
Page 10
Make sure that the wall has enough space for the TV and is capable of supporting a weight of at least four times that of the TV. Refer to the following table on installing the TV to the wall. See page 16-18 (Specifications) for the TV’s weight.
Page 11
Make a mark on the Paper Template A that indicates the centre of the screen for your TV. KDL-50W800B KDL-42W800B, KDL-42/32W700B Scale on Paper Template A Scale on Paper Template A Mark for KDL-50W800B Mark for KDL-42W800B, KDL-42W700B Mark for KDL-32W700B Tape the Paper Template A to the wall and drill holes according to the numbering on the Paper Template A using an electric drill.
Preparing for the installation of the TV Remove screws from the rear of the TV. Be sure to store the removed screws in a safe place, keeping them away from children. Soft cloth Insert the pin (on the Stand Protector C) into the hole on the Stand H, then fold up the Stand Protector C.
Installing the TV on the wall Make sure to connect and bundle the cables before installing the TV on the wall. Install the TV on the wall. Then, confirm the Stand Protector C is firmly latched into the Wall-Mount Base B and the Spacers E touch the wall. Attach the Bracket Cap Plate F using the supplied screws G.
Page 14
Dimensions of the hole positions on the wall Provide the following information to the licensed contractors if necessary. Use screws (8 mm in diameter, not supplied) to install the Wall-Mount Base B on the wall. Be sure to use the supplied Paper Template A that shows the actual position of Wall-Mount Base B for easy installation.
TV. If the problem persists, contact your dealer or Rear of TV Sony service centre with the number of times the illumination LED flashes red (interval time is three seconds). Press / on the TV to turn it off, disconnect the AC power cord (mains lead), and inform your dealer or Sony service centre.
Table-Top Stand Wi-Fi Alliance. KDL-50W800B: 1,116 × 656 × 64 mm • “Sony Entertainment Network logo” and KDL-42W800B: 958 × 563 × 64 mm “Sony Entertainment Network” are KDL-42W700B: 958 × 563 × 64 mm trademarks of Sony Corporation.
準備安裝電視機 從電視機後部拆下螺絲。請務必將取下的螺絲放置在安全的地方,讓螺絲遠離兒童。 軟布 將針(位於底座防護器 C 上)插入底座 H 上的孔内,然後折起底座防護器 C。確定底座防護器 C 穩固地鎖至底座 H。 KDL-50W800B KDL-42W800B, KDL-42/32W700B 針 使用附件的螺絲 H 安裝底座 D 至電視機。將墊片 E 安裝至由三角形記號 f 標記的孔内。 KDL-50W800B 用於說明用途。 × 軟布...
將電視機安裝在牆上 將電視機安裝在牆上之前,確保先連接和捆紮纜線。 將電視機安裝在牆上。 然後, 確定底座防護器 C 穩固地鎖入壁掛式底座 B 以及墊片 E 觸及牆壁。 使用附件的螺絲 F 安裝支架蓋板 G。 KDL-50W800B KDL-42W800B, KDL-42/32W700B 牆壁 牆壁...
請參閲下圖有關電視機上按鈕的位置。 當照明 LED 閃紅燈時,計算閃爍次數 (間隔時間 電視機背面 為三秒) 。 如果照明 LED 閃紅燈,從電視機拔下 AC 電源線, 待兩分鐘之後再打開電視機,以進行電視機重設。 如果問題仍然存在,請聯繫您的經銷商或 Sony 服 務中心並告知照明 LED 閃紅燈的次數 (間隔時間 為三秒) 。按電視機上的 / 將其關閉,拔掉 AC 電源線,然後告訴您的經銷商或 Sony 服務中心。 照明 LED 開啓。 當照明 LED 沒有閃爍,檢查以下列表中的項目。 如果您不要發光 LED 亮起,您可將之關閉。 您也可參閱 i-Manual 中的 [ 故障排除 ] 或通過選...