Analogue Set-Up - Sony BRAVIA 4-256-733-F2(1) Operating Instructions Manual

Sony lcd digital colour tv operating instructions
Table of Contents

Advertisement

Dual Sound
Speakers
Headphone Settings
Audio Out
Key Tone
Optical Out

Analogue Set-up

Programme List
Display
1 Digit Direct
Auto Tuning
Programme Sorting
Sets the sound from the speaker for a stereo or bilingual broadcast.
Stereo/Mono
For stereo broadcasts.
A/B/Mono
For bilingual broadcasts, select "A" for sound channel 1, "B"
for sound channel 2, or "Mono" for mono channel, if
available.
~
• For other equipment connected to the TV, set "Dual Sound" to "Stereo", "A", or
"B".
TV Speakers
Turns on and outputs the TV's sound from the TV speakers.
Audio System
Turns off the TV speakers and outputs the TV's sound from
external audio equipment connected to the audio output jacks
(sockets) on the TV.
~
• To use multi-channel audio, select external audio system and connect optical out
for equipment compatible with Dolby Digital.
• "Audio System" must be selected to listen to 5.1 multi-channel audio.
Headphone
Switches the TV's internal speakers on/off when you connect
Speaker Link
headphones to the TV.
Fixed
The audio output of the TV is fixed. Use your audio
receiver's volume control to adjust the volume (and other
audio settings) through your audio system.
Variable
When using an external audio system, volume output from
audio out can be controlled using the TV's remote.
Select "On" to play sounds as you navigate with the remote.
z
• When you select "Off", the TV start-up sound is also turned off.
For audio signals from the DIGITAL AUDIO OUT (OPTICAL). Select "Auto" for
equipment compatible with Dolby Digital, or "PCM" for equipment not
compatible with Dolby Digital.
Select "Off" to hide the list of analogue channels from the XMB (XrossMediaBar).
Select "On" for changing analogue channels with one preset number button (0 – 9)
on the remote.
~
• You cannot select channel numbers 10 and above by entering two digits on the
remote.
Automatically tunes in all available analogue channels, and stores their settings in
the TV. You can run "Auto Tuning" after moving to a new residence, changing
service providers, or to search for newly launched channels.
Changes the order of analogue channels stored in the TV.
53
(Continued)
GB

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bravia kdl-22px300

Table of Contents