Sony BRAVIA 4-256-733-F2(1) Operating Instructions Manual page 67

Condition
The TV turns on
automatically.
Some input sources cannot be
selected.
The remote does not function. • Replace the batteries.
HDMI equipment does not
appear on "HDMI Device
Selection".
You cannot select "Off" in
"Control for HDMI".
The "Parental Lock" password
of the TV setting menu has
been forgotten.
Not all channels are tuned for
cable.
The TV surrounds become
warm.
Explanation/Solution
• Check if the "On Timer" is activated (page 48).
• Select "AV Preset" and confirm the "Always" setting for the input
sources (page 55).
• Your TV may be in SYNC mode.
Press SYNC MENU, select "TV Control" and then select "Home
(Menu)" or "Options" to control the TV.
• Check the function buttons on the remote (page 13). If PS2 is selected
in TV mode or TV is selected in PS2 mode, the remote will not function.
• Check that your equipment is compatible with Control for HDMI the
value of "Control for HDMI" is "On".
• You cannot select "Off" for any audio system compatible with "Control
for HDMI". If you want to change the audio output to the TV speaker,
select "TV Speakers" in the "Speakers" menu (page 53).
• Enter 9999 for the PIN code. (PIN code 9999 is always accepted.)
• Check the support website for cable provide information.
http://support.sony-europe.com/TV/DVBC/
• When the TV is used for an extended period, the TV surrounds become
warm.
You may feel hot when touching there by the hand.
67
GB