Analogue Set-Up Menu - Sony BRAVIA KDL-46V3000 Operating Instructions Manual

Analogue Set-up menu

1 Digit Direct
Auto Tuning
Programme Sorting
Programme Labels
When "1 Digit Direct" is set to "On", you can select an analogue channel using one
preset number button (0 - 9) on the remote.
~
When "1 Digit Direct" is set to "On", you cannot select channel numbers 10 and above entering
two digits using the remote.
Tunes in all the available analogue channels.
This option allows you to retune the TV after moving house, or to search for new
channels that have been launched by broadcasters.
Changes the order in which the analogue channels are stored on the TV.
F f
1 Press
/ to select the channel you want to move to a new position, then
press .
F f
2 Press
/ to select the new position for your channel, then press
Assigns a channel name of your choice up to five letters or numbers. The name will
be displayed briefly on the screen when the channel is selected. (Names for channels
are usually taken automatically from Analogue Text (if available).)
F f
1 Press / to select the channel you want to name, then press
F f
2 Press / to select the desired letter or number ("_" for a blank space),
g
then press .
If you input a wrong character
G g
Press / to select the wrong character. Then, press
character.
To delete all the characters
Select "Reset", then press
3 Repeat the procedure in step 2 until the name is completed.
4 Select "OK", then press
You can select the options listed below on the
"Analogue Set-up" menu. To select options in
"Settings", refer to "Navigating through menus"
(page 22).
F f
/
.
.
.
.
to select the correct
Continued
33
GB