Frequently Asked Questions - Spectrum Technologies Field Scout CM1000 Operation Manual

Frequently Asked
Questions
Why doesn't my CM1000 detect my GPS signal?
The GPS receiver must be turned on and receiving
satellite signals prior to turning on the CM1000.
The data output from the GPS must be specifically
set for NMEA text. This setting is in the GPS
receiver itself, not in the CM1000 meter or software.
I have new batteries. Why doesn't my initial startup
screen read "Battery at 100%"?
The battery strength indicator is set to accurately
detect the strength of alkaline batteries. The
displayed battery strength of NiCad batteries will be
less than 100%.
Does the CM1000 transmit any signal or light to the
target?
No. The CM1000 only senses the light being
reflected from the target and compares that reflected
light to the ambient light available for reflection.
23