Using The Imager - Hand Held Products Dolphin 9500 Series Quick Start Manual

Using the Imager

The compact image engine instantly reads all popular 1D and 2D bar codes and
supports omni-directional aiming and decoding for greater flexibility in real-world
settings.
The imager can also capture digital images, such as signatures and pictures of
damaged inventory. Images are saved in industry-standard file formats.
Image Engine Options - Dolphin 9500/9550
Name
IT4100SR
IT4300SR
IT4100SF
IT4300SF
IT4100HD
Image Engine Options - Dolphin 9501/9551
Name
SE1200HP
SE1200LR
SE1200ALR
Decoding a Bar Code
See Sample Bar Codes
1. Point the Dolphin terminal directly at the bar code. The aimer should be
oriented in line with the bar code to achieve optimal decoding.
2. Project the aimer by pressing and holding the SCAN key.
You can also press and hold the Scan Trigger on the Dolphin 9550/9551.
3. The scan LED lights red.
Decode
LED
4. Center the aiming beam over the bar code.
A range of 4–10 inches (10–25 cm) from the bar code is recommended.
5. When a bar code is successfully decoded, the decode LED lights green and
the terminal beeps.
18
Aimer
Green aiming beam
Laser aimer pattern
Green aiming beam
Laser aimer pattern
Green aiming beam
Aimer
Long-range
Long-range
Long-range
on page 10
Decodes from ...
2.5 to 12.5 in. (6.3 to 32 cm.)
2.1 to 8.9 in. (5 to 22.6 cm.)
2.2 to 6.5 in. (5.6 to 16.5 cm.)
Decodes from ...
5 mil—2.75 to 7 in (0.07 to 0.17 m)
55 mil reflective—5 to 50 in (.13 to 1.27 m)
10 mil—10 to 24 in (0.25 to .6 m)
100 mil reflective—66 to 232 in (1.67 to 5.9 m)
13 mil—18 to 39 in (0.45 to 1 m)
100 mil reflective—102 to 363 in (2.6 to 9.2 m)
to practice decoding.
Dolphin® 9500 Series Quick Start Guide
Scan
LED