Advertisement
Step #7
Installing the Rubber Feet
Item
Qty
Description
(D)
(6)
Rubber Feet
D
D
Step #8
Preparing your Boe-Bot
Item
Qty
Description
(1)
Your Boe-Bot
D
D
D
D
Fig #15
Use Fig #15 as a guide to install the rubber feet.
Be careful not to bend the legs. Slide the rubber feet (D)
onto each Leg as shown in Fig #16. Double check your
work then proceed to Step #8.
Use Fig #17 as a guide. To complete the Crawler Kit upgrade, some
simple changes must be made to your Boe-Bot. First, remove the
wheels and ball caster. Then, remove your Board of Education
project platform to prevent the chance of damaging it during the
installation, and save the screws for the final step. Next compare your
servo installation to Fig #17. If your servos are installed inside the
Boe-Bot chassis, they must be removed and reinstalled as shown.
Make sure the servo head is toward the middle of the chassis then
proceed to Step #9
Fig #17
© Parallax, Inc. 2004 - Crawler Kit for Boe-Bot Robot Manual
Fig #16
®
5
Advertisement
