Advertisement
Step #1 Assembling the Crawler Sides
Item
Qty
Description
(A)
(2)
Crawler Sides
(E)
(2)
Nylon Washers
(H)
(2)
19 mm (3/4") Nylon Standoffs
(I)
(4)
25 mm (1") Nylon Standoffs
(K)
(4)
M3x12 Phillips Pan Head Screws
(L)
(2)
M3x10 Phillips Pan Head Screws
I
K
L
L
K
I
Step #2
Installing the Legs
Item
Qty
Description
(C)
(4)
Legs
(K)
(4)
M3x12 Phillips Pan Head Screws
(Q)
(4)
Plastic Screw Covers
C
Q
I
K
C
K
I
Q
2
© Parallax, Inc. 2004 - Crawler Kit for Boe-Bot Robot Manual
I
E
A
K
H
H
K
A
E
I
Fig #2
C
I
C
I
Fig #4
Use Fig #2 as a guide to install the Nylon standoffs (H &
I) using the screws (K) to the Crawler sides (A). The
shorter standoffs (H) go to the center, and the longer
standoffs (I) are mounted to the left and right. Tighten
screws firmly.
Each side panel should be a mirror image of the other.
Before moving on position the pieces exactly as they
appear in Fig #3 and double check your work and
proceed to Step #2.
Use Fig #4 as a guide to install Legs.
Insert screws (K) through screw covers (Q) and middle
hole of Legs (C). Screw into standoffs (I). Tighten until
leg can just rotate freely but is not sloppy.
Before continuing, position the pieces exactly as they
appear in Fig #5. Double check your work and then
proceed to Step #3.
Q
K
K
Q
Fig #3
Fig #5
Advertisement
