Sony 4-106-868-11(1) Operating Instructions Manual page 40

AV Set-up
40
GB
AV Preset Assigns a name to any equipment connected to the side and
rear sockets. The name will be displayed briefly on the screen
when the equipment is selected. You can skip an input source
that is not connected to any equipment.
1
2
-, CABLE, SAT,
VCR, DVD/BD,
GAME, AUDIO
SYSTEM, CAM,
PC
Edit
Skip
AV2 Input Sets a signal to be input through the socket labelled
Auto
RGB
S Video
Composite
AV2 Output
Sets a signal to be output through the socket labelled
VCR/ DVD recorder or other recording equipment to the
equipment connected to other sockets of the TV.
TV
Auto
Press F/f to select the desired input source, then press
.
Press F/f to select the desired option below, then press
.
Uses one of the preset labels to assign a
name to connected equipment.
Creates your own label.
1
Press F/f to select the desired letter
or number ("_" for a blank space),
then press g.
If you input a wrong character
Press G/g to select the wrong
character. Then, press F/f to select
the correct character.
2
Repeat the procedure in step 1 until
the name is completed.
3
Select "OK", then press
Skips an input source that is not
connected to any equipment when you
press F/f to select the input source.
/ AV2 on the rear of the TV.
Switches automatically among the signals
of RGB input, S Video input, Composite
video input depending on the input
signal.
Inputs the RGB signal.
Inputs the S Video signal.
Inputs the Composite video signal.
/ AV2 on the rear of the TV. If you connect a
/ / AV2 socket, you can then record from the
Outputs a broadcast.
Outputs whatever is being viewed on the
screen (except signals from the HDMI IN
1, HDMI IN 2, HDMI IN 3,
COMPONENT IN and
sockets).
.
/
/
/
/ PC IN