E.T. Systems UMPETHA Installer's Instructions page 3

 Caution! It is important for personal safety to follow all the instructions carefully. Incorrect installation or misuse may cause serious
personal harm.
 Keep the instructions in a safe place for future reference.
 This product was designed and manufactured strictly for the use indicated in this documentation. Any other use not expressly
indicated in this documentation, may damage the product and/or be a source of danger.
 We accept no responsibility due to improper use of this product.
 Care must be taken not to install this product in an unsafe environment. I.e. near inflammable gases and or fumes.
 We will not accept responsibility if the principles of good workmanship are disregarded by the installer. The construction of the
gate must be sound and automatable. It is the responsibility of the installer to ensure that all mountings to the gate are sufficient to
withstand the necessary forces in cases of overload.
 Before carrying out any work on the product, ensure that the electrical supply is switched off.
 It is highly recommended that a set of safety infra-red beams be used in conjunction with this product.
 We accept no responsibility regarding safety and correct operation of the automation if other manufacturer's equipment is added
to this product.
 Do not make any modifications or alterations to this product.
 It is the responsibility of the installer/ service provider to completely instruct and demonstrate the proper use of this product,
especially the emergency override, to the end user. It is also the responsibility of the installer/ service provider to issue all end user
documentation, which accompanies this product, to the end user.

Ensure that other persons, especially children are clear of the gate and opener before and during operation.
 Keep remote transmitters away from children to prevent accidental activation of the system.
 The end user should refrain from attempting to make any repairs or adjustments to the system and should contact professional
qualified assistance timorously.
 Anything other than expressly provided for in these instructions is not permitted.
 The electrical supply to this product must comply with the local electrical code of practice and any electrical work must be carried
out by a qualified electrician.
 Over and above the recommendation to use safety infra-red beams with this product it is mandatory to ensure a set has been
installed and is in proper working condition when using the automatic closing feature.
UMPETHA 082009/072010.014
WARNING TO THE INSTALLER. GENERAL SAFETY OBLIGATIONS.
3