E.T. Systems UMPETHA Installer's Instructions page 22

Learning a remote transmitter button in the receiver for BT open/close operation: -
Action
Press and hold the required remote
transmitter button
Short circuit the middle RX
programming pin to the BT pin.
(Furthest from the gate)
Remove the short circuit once the
RX LED flashes confirmation.
Release remote transmitter button
Learning a remote transmitter button in the receiver for the pedestrian operation: -
Action
Press and hold the required remote
transmitter button
Short circuit the middle RX
programming pin to the PED pin.
(Closest to the gate)
Remove the short circuit once the
RX LED flashes confirmation.
Release remote transmitter button
UMPETHA 082009/072010.014
(25 user memory)
Pictorial confirmation
(6 user memory)
Pictorial confirmation
22
Response
RX LED flickers lightly.
RX LED flashes
Confirmation.
1 flash = First transmitter learnt.
2 flashes = Successful there is still
memory available.
Multiple rapid flashes = memory full.
RX LED remains lit in standby.
Response
RX LED flickers lightly.
RX LED flashes
Confirmation.
1 flash = First transmitter learnt.
2 flashes = Successful there is still
memory available.
Multiple rapid flashes = memory full.
RX LED remains lit in standby.