Various Ways Of Playback; Playing An Md On The Station; Playing Back With Active Speakers; Selecting A Track Directly (Direct Selection) - Sony MD Walkman MZ-R5ST Operating Instructions Manual

zVarious ways of
playback
Playing an MD on the
station
Play an MD with the recorder attached to
the station as follows. You can use the
card remote commander as well.
p =
POWER
ACTIVE SP LEVEL
1
4
(
7
>
10
=
=
P
P
To
Play
Adjust the volume
of the headphones
Pause
Find the beginning
of the current track
Find the beginning
of the next track
Go backwards while
playing 1)
Go forward while
playing 1)
Remove the MD
Turn power off
1) To go backwards or forward quickly
without listening, press P then keep
pressing = or +.
2)
Once you open the lid, the point to start
play will change to the beginning of the
first track.
20
-EN
(
+ P
POWER
POWER
2 3
5 6
+
8 9
PLAY MODE
0/10
ACTIVE SP
ACTIVE
( +
LEVEL
SP LEVEL
p
p
Operation
Press (
Turn LEVEL on the
station
Press P
Press P again to
resume play
Press = once
Press + once
Keep pressing =
Keep pressing +
Press p and open
2)
the lid.
Press POWER
Note
The power turns off automatically when you
leave the station unoperated for 5 minutes
during stop. Press POWER or ( to turn the
power on again.
Playing back with active
speakers
You can enjoy MD playback on active
speakers such as SRS-Z1000 (not
supplied), etc., by connecting it to the
station (page 35).
Operate with the buttons on the station or
from the card remote commander.
To adjust volume
Press ACTIVE SP LEVEL –/+ on the
station or the card remote commander.
Selecting a track directly
(Direct Selection)
You can select a track directly by pressing
the track number on the card remote
commander.
1
Press the number key(s) for the track
number of the track of your choice.
The recorder will play the selected
track.
POWER
1 2 3
4 5 6
7 8 9
PLAY MODE
>
10 0/10
ACTIVE SP
= ( +
LEVEL
P p
z
•To select track number 10, press 0/10.
•To select a track number larger than 10,
first press >10, then press the number for
the tens digit and then the units digit. Press
0/10 if the units digit is zero.
•To select a track number larger than 100,
first press >10 twice, then press the number
for the hundreds digit, tens digit, and the
units digit.
Number keys