Clock
Displaying the Time
By default, the time of day is displayed only when the ignition is ON and the radio is OFF. The Clock can be set to show the time also
when radio is ON, by doing the following:
15
1) Push MENU
button.
or
13
2) Push button
14
3) Push button
or
13
4) Push button
14
5) Push button
12- or 24-Hour Format
The clock can be set to 12-hour or 24-hour mode. The 12-hour mode distinguishes between AM and PM.
To change the time format, do the following:
15
1) Push MENU
button.
or
13
2) Push button
14
3) Push button
13
4) Push button
14
5) Push button
Setting the Clock
Normally the time is set automatically by the trucks system. The option to manually set the time will then not be available.
To set the clock manually, do the following:
15
1) Push MENU
button.
13
2) Push button
14
3) Push button
13
4) Push button
14
5) Push button
or
13
6) Push button
14
7) Push button
13
8) Push button
14
9) Push button
Turning the alarm ON or OFF
To set turn On or Off the Alarm time, do the following:
15
1) Push MENU
button.
or
13
2) Push button
14
3) Push button
13
4) Push button
14
5) Push
button to change the alarm status.
17
until "CLOCK" is displayed.
to enter Clock sub menu.
17
until "VISIBLE" is displayed.
to change between ON/OFF status.
17
until "CLOCK" is displayed.
to enter Clock sub menu.
or
17
until "12/24 HR" is displayed.
to change between 12H or 24H options.
or
17
until "CLOCK" is displayed.
to enter Clock sub menu.
or
17
until "SET TIME" is displayed.
to enter the Set time sub menu.
17
to adjust the hours up or down respectively.
to set the hour and toggle to the minute adjustment.
or
17
to adjust the minutes up or down respectively.
to save the time and finish the process.
17
until reaching "Wake Up Alarm" is displayed.
to enter the Wake up alarm sub menu.
or
17
until "On/Off" is displayed.
9