14
Play Tracks on a CD or in Random Order
There are two possible Random settings for a CD: Random All and Random Folder (If the content of the CD is stored in folders).
To play tracks in random order, do the following:
1) Press the MENU button
13
2) Push button
3) Enter Random Sub menu by pressing button
13
4) Push button
14
5) Push button
Repeat Tracks on a CD
There are three possible Repeat settings for a CD: Repeat All, Repeat track and Repeat Folder (If the content of the CD is stored in
folders). By default, Repeat All is active.
To change the repeat setting, do the following:
1) Press the MENU button
13
2) Push button
3) Enter Random Sub menu by pressing button
13
4) Push button
14
5) Push button
Change to next another Folder on a CD
If the content of the CD is stored in folders, it is possible to change folders directly. To do this, push either the button
17
button to move to the next or previous album/folder respectively.
Scan a CD
When CD is scanned, the first 10 seconds of each track is played.
To activate Scan, do the following:
1) Press the MENU button
2) Select "SCAN" by pressing button
Scanning will stop if:
1) The face plate buttons
OR
2) All tracks are browsed through.
15
.
or
17
until "RANDOM" is displayed.
or
17
to choose between All and Folder.
to activate the desired Random mode.
15
.
or
17
until "REPEAT" is displayed.
or
17
to choose between All, Track and Folder.
to activate the desired Repeat mode.
15
.
14
.
16
14
or
14
.
14
.
.
or
13