Page 1
OPERATOR'S MANUAL Cat. No. M18 BLTRC M18™ BRUSHLESS THREADED ROD CUTTER WARNING To reduce the risk of injury, user must read and understand operator's manual.
GENERAL POWER TOOL • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left SAFETY WARNINGS attached to a rotating part of the power tool may Read all safety warnings, instruc- WARNING result in personal injury.
Maintain labels and nameplates. These carry from other metal objects, like paper clips, coins, important information. If unreadable or missing, keys, nails, screws or other small metal objects, contact a MILWAUKEE service facility for a ® that can make a connection from one terminal replacement.
Avoid Removing/Replacing the Cutting Dies cutting short pieces of material that put Use only MILWAUKEE® cutting dies. Do not use hands near cutting dies. Laceration and with other die types. Other die types can cause amputation can occur.
Jammed Cutting Dies tool operation. Return the tool, battery pack, and Dirt and debris can cause the cutting dies to become charger to a MILWAUKEE service facility for ® jammed together after a cut. If the tool shuts off and repair.
Page 6
Repairs For repairs, return the tool, battery pack and charger to the nearest service center. ACCESSORIES only recommended WARNING accessories. Others hazardous. For a complete listing of accessories, go online to www.milwaukeetools.com.au/ www.milwaukeetools.co.nz or contact a distributor.
Page 8
SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty ® . Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...