Zolix Instruments SC300 Operation Manual page 12

Motion controller
Table of Contents

Advertisement

Command from PC to SC300 : HY↓ //Go to the zero position of Y axis
Command from PC to SC300 : HZ↓ //Go to the zero position of Z axis
Command from SC300 to PC: ?X,0↓
(9) Controlling moving
Command from PC to SC300:
+X,n↓
+Y,n↓
+Z,n↓
-X,n↓
-Y,n↓
-Z,n↓
Command from SC300 to PC:
?X,x↓
?Y,y↓
?Z,z↓
ER↓
(10) Inquiring the current position of the stage
Command from PC to SC300:
?X↓
?Y↓
?Z↓
Command from SC300 to PC:
?X,x↓
?Y,y↓
Zolix Instruments Co., Ltd.
Communication Protocol and Commands Explanations
?Y,0↓
?Z,0↓
ER↓
//increase the displacement n in X direction.
// increase the displacement n in Y direction.
// increase the displacement n in Z direction.
// decrease the displacement n in X direction.
// decrease the displacement n in Y direction.
// decrease the displacement n in Z direction.
//the current position of the stage in X direction
// the current position of the stage in Y direction
// the current position of the stage in Z direction
//inquiring the current position of the stage in X axis
// inquiring the current position of the stage in Y axis
// inquiring the current position of the stage in Z axis
// the current position x of the stage in X axis
// the current position y of the stage in Y axis
http://www.zolix.com.cn E-mail:info@zolix.com.cn
// the zero position of X axis
// the zero position of Y axis
// the zero position of Z axis
// Error
10

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SC300 and is the answer not in the manual?

Table of Contents