Sony MEX-DV2200 Operating Instructions Manual page 48

SOUND
Item
EQ7 TUNE (page 39)
AUX-LVL (AUX Level)
(page 50)
DVD-LVL (DVD Level)
(page 26)
DOLBY ADJ (Dolby Level
Adjust) (page 26)*
DTS ADJ (DTS Level Adjust)
(page 26)* 2
SP SETUP (Speaker Setup)
(page 40)
DISC.LAYER (page 34)
Selects the playback layer
(area) of a Super Audio CD.
SA-CD MOD (page 35)
Selects the sound quality for
Super Audio CD playback.
*1 Unavailable during karaoke mode or when "SA-CD MOD" is set to "HQ."
*2 Appears and available only when "DVD-LVL" is set to "ADJUST ON."
48
Option
–
(–6 ~ +18 dB)
z: 0
ADJUST ON
ADJUST OFF
(z)
(–10 ~ +10 dB)
z: +8
2
(–10 ~ +10 dB)
z: +4
CENTER
(Center Spekaer
Setup) (page 40)
SUB (Subwoofer
Setup) (page 40)
LEVEL ADJ
(Level Adjust)
(page 40)
HPF (High Pass
Filter)
LPF (Low Pass
Filter)
POS TUNE
(Position Tune)
(page 39)
MLT (z)
2CH
CD
HQ (z)
STD
Purpose
–
To select the level.
To allow for adjusting the
output level of Dolby
Digital and DTS format
separately.
To deactivate the level
adjustment.
To select the level.
To select the level.
To set the connection status
(ON, OFF).
To set the connection status
(ON, OFF).
To select the level (–6 ~ +6,
13 steps).
To select the front/rear
speaker cut-off frequency
(OFF (z), 80HZ, 120HZ).
To select the subwoofer
cut-off frequency (120HZ
(z), 80HZ).
To set the listining position
(0 ~ 400 cm (0 and
1
13 / ft)).
10
To play multi-channel area
in the Super Audio CD
layer.
To play 2-channel (stereo)
area in the Super Audio CD
layer.
To play CD playback layer
(if contained).
To have high sound quality.
To have standard sound
quality.
Unit status
During playback* 1 /
radio reception.
During AUX
playback.
During disc
playback.
Unit off.
During
playback* 1 /radio
reception.
Unit off.