Checking The Program Format; Adjusting The Audio Output Level - Dvd Level; Magnifying Pictures - Sony MEX-DV2200 Operating Instructions Manual

Checking the program format

You can check the number of channels and
component position on the DVD VIDEO being
played.
1
During playback, press
(VISUAL SETUP).
The play mode menu appears.
2
Press M/m to select
The program format appears.
Current audio format*
12 ( 67 )
018 ( 034 )
T 1:35:55
1:ENGLISH Dolby D
Current program format
* "PCM," "DOLBY DIGITAL," "DTS," etc., appears
depending on the disc.
The letters in the program format display
represent the following sound components and
its position.
: Front (left)
: Front (right)
: Center
: Rear (left)
: Rear (right)
: Rear (monaural): The rear component of
the Dolby Surround processed signal and
the Dolby Digital signal
: Low Frequency Effect signal
The program format name and channel numbers
appear as follow.
Example: Dolby Digital 5.1 ch
DOLBY DIGITAL 3 / 2 . 1
Front component × 2 +
Center component × 1
To hide the play mode menu, press
(VISUAL SETUP).
26
(AUDIO).
PLAY
DVD VIDEO
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
L C R
LFE
LS RS
Rear component × 2
LFE component × 1
Adjusting the audio output level
— DVD level
The audio output level differs depending on the
recorded format. To reduce the volume level
differences between disc and source, you can
adjust audio output level according to the
recorded format. The default level is set for PCM
format, and the level for Dolby Digital and DTS
format can be adjusted separately from the
default level.
1
During playback, press
(SYSTEM SETUP).
The system setup item appears on the main
unit.
2
Press M/m to select "DVD-LVL," then
press (ENTER).
3
Press m to set to "ADJST ON," then
press (ENTER).
4
Press M/m to select "DOLBY ADJ" or
"DTS ADJ," then press (ENTER).
5
Press M/m to adjust the output level.
The output level is adjustable in single steps,
between –10 and +10.
6
Press (ENTER).
The setting is complete.
To hide the system setup display, press
(SYSTEM SETUP).
With the main unit
Press (SETUP) instead of (SYSTEM SETUP), rotate
the control dial instead of pressing M/m, then press
the control dial instead of (ENTER).

Magnifying pictures

VISUAL
SETUP
You can magnify pictures.
MULTI DIGITAL
</M/m/,
ENTER