Lockisotag - Siemens SIMATIC RF310M Function Manual

RFID Reader Interface Reference
3.4 IRfReaderApi
3.4.15

LockIsoTag

LockIsoTag(tagID : string,
Parameters
● tagID
● iso6BAddress
● iso6BTagDataLength
Return value(s)
None.
Exceptions
RfReaderApiException
Note
Locks an ISO tag against further write-accesses.
For detailed information about the iso6BTagAddress and iso6BTagDataLength, see the ISO
Standard 18000-6 (see references section).
Limitations
This function is only valid when the protocol type is set to ISO18000-6B.
Invoking this function while another protocol is set (e.g. EPCC1GEN2) will result in an
exception.
Version information
Supported in RFID Reader Interface: since V1.0
62
iso6BAddress : uint
iso6BTagDataLength : uint) : void
The ID of a tag which is to be locked, given as a plain hexadecimal encoded string.
The ISO address is an offset at which to start the locking procedure. The ISO Standard
18000-6 specification defines this address as 1 byte in the range of 0 to 255.
The length in bytes of the ISO tag memory block that is to be locked.
Error while communicating with the reader service.
Check the Error member for more information.
Function Manual, 02/2009, J31069-D0198-U001-A1-0076
Mobile Reader