Gettagmemory - Siemens SIMATIC RF310M Function Manual

3.4.9

GetTagMemory

GetTagMemory(tagID : string, memoryBank : uint,
Parameters
● tagID
● memoryBank
● startAddress
● dataLength
● Password
Return value(s)
An array of bytes containing the specified tag memory's contents.
In case of errors null is returned.
Exceptions
RfReaderApiException
Mobile Reader
Function Manual, 02/2009, J31069-D0198-U001-A1-0076
startAddress : uint, dataLength : uint,
password :string) : byte[]
The ID of a tag whose data are to be read, given as a hexadecimal encoded string. (i. e.
each byte is represented by a two-letter hexadecimal number).
The memory bank (0 - 3) from which to read data.
Valid Values for the air protocol 'ISO18000-6B,'
0 – USER MEM
Valid values for the air protocol 'EPCC1G2' are:
0 – Reserved
1 – EPC,
2 – TID and
3 – USER MEM.
Valid values for the air protocol 'RF300'"are:
0 – Memory
Valid values for the air protocol 'ISO15693' are:
0 – Memory
The base address within the memory bank from which to read data.
Base addresses are specified in bytes.
The length in bytes of the data to be read.
An access password if needed. The ISO18000-6B protocol e.g. does not support a
password. So just pass an empty string.
A password is a hexadecimal encoded string of up to eight characters.
Error while communicating with the reader service.
Check the Error member for more information.
RFID Reader Interface Reference
3.4 IRfReaderApi
51