When you deploy your application, there are two things to consider.
● When using Visual Studio to deploy your application, make sure you selected
● Regardless of how you deploy your application, ensure that all needed system
All of these are provided on the device's flash memory within a compressed archive.
Mobile Reader
Function Manual, 02/2009, J31069-D0198-U001-A1-0076
"PtxPxa27x: ARMV4I_Release as a target device.
components are located beneath your application.
This means you must provide the RFID Reader Interface assembly
Siemens.Simatic.RfReaderApi.dll and its configuration file
Siemens.Simatic.RfReaderApi.dll.config.
You also must provide the following Psion-specific files
rfid_power_commutation.dll
PsionTeklogixRFID.dll
PsionTeklogicNet.dll
PtxSdkCommon.dll
RFID Reader Interface User's Guide
2.2 How Do I Use the Reader Interface?
17