Siemens SIMATIC RF310M Function Manual page 61

Example
Bank
Mask
Action
In the above example, the lockMask is 11 1111 0000 (hexadecimal 3F0). This means that
you can only write action bits to the Kill, Access and EPC memory locations. The lockAction
fields are 10 1010 0000 (hexadecimal 2A0) which results in the following:
● Kill Password:
● EPC Memory Bank:
For detailed information about the epcGen2LockAction and epcGen2LockMask, see the
EPC Radio Frequency Identity Protocols Standard Specification.
Limitations
This function is only valid when the protocol type is set to EPCC1GEN2.
Invoking this function while another protocol is set, e.g.ISO18000-6B, will result in an
exception.
Version information
Supported in RFID Reader Interface: since V1.0
Mobile Reader
Function Manual, 02/2009, J31069-D0198-U001-A1-0076
Kill PWD
(00)1 1
(00)1 0
Can be read and write-accessed from the secured state but not from the open state.
The Access Password of the tag must be known before the kill password can be read or
changed.
Can be write-accessed from the secured state but not from the open state.
The Access Password must be known before a new ID can be written to the tag.
Access EPC
PWD Memory
1 1 1 1
1 0 1 0
RFID Reader Interface Reference
3.4 IRfReaderApi
TID Memory User
Memory
0 0 0 0
0 0 0 0
Hex String
Value
3F0
2A0
61