Combination Switch - Mercedes-Benz 190 E2.3 1985 Owner's Manual

Combination Switch

1 Low beam (with lighting switch
turned clockwise two notches)
2 High beam (with lighting switch
turned clockwise two notches)
3 High beam flasher (high beam
available independent of lighting
switch position)
4 Turn signals, right
5 Turn signals, left
-r ,
To operate the turn signals, move the
combination switch past the point of
resistance (up or down). The switch is
automatically cancelled when the
steering wheel is turned by a large
enough angle.
To signal minor directional changes of
the vehicle, such as changing lanes on
a highway, move combination switch to
the point of resistance only and hold it
there.
6 Control for windshield washer
system
When the washer system is
switched on, the wipers also
operate.
7 Windshield wiper speeds
0 Windshield wiper switched off
1 Intermittent wiping
II Normal wiper speed
III High wiper speed
Hint:
If one of the turn signals fails, the turn
9 6 8 4 signal indicator system flashes and
sounds at a faster sequence than
under normal operating conditions.
3
39