Sony DVP-NS900V Operating Instructions Manual page 34

qf Press X/x to select the item.
Choose the item that matches the audio connection you selected in pages 25 to 29 (
through
Audio Cord Connection Type
C-2 D-2
B-2
qg Press ENTER.
When "DIGITAL OUTPUT" is selected in Step qa, Quick Setup is finished. All
connections and setup operations are complete.
If your AV amplifier (receiver) has an MPEG audio decoder, set "MPEG" to "MPEG"
(page 92).
When "DIGITAL & 5.1CH OUTPUT" is selected in Step qa, the Setup Display for
"SPEAKER SETUP" appears.
qh Press X/x to select the size of the centre speaker.
If no centre speaker is connected, select "NONE." Refer to page 94 for each selection item.
qj Press ENTER.
The Setup Display for selecting the size of the rear speaker appears.
qk Press X/x to select the size.
If no rear speaker is connected, select "NONE."
"SIDE" and "REAR" refer to the speakers' position relative to your listening position.
Refer to page 94 for each selection item.
34
).
D
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
TEST TONE:
To set press
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
TEST TONE:
You select
D-PCM
DTS (only if the amplifier
(receiver) has a DTS decoder)
OFF
FRONT:
CENTER:
REAR:
SUBWOOFER:
then
ENTER
OFF
FRONT:
CENTER:
REAR:
SUBWOOFER:
LARGE(REAR)
Page
92
92
LARGE
NONE
NONE
LARGE
SMALL
LARGE
LARGE
NONE
NONE
B