To erase a character
1
Press . or > to move the cursor to
the character you want to erase.
2
Press CLEAR.
To insert or overwrite a character
1
Press . or > to move the cursor to
the character you want to insert or
correct.
2
Select a correct character by pressing C/
X/x/c or turning the click shuttle.
3
To insert the character, press ENTER.
To overwrite, do not press ENTER but
move the cursor by pressing . or
>.
To check the Disc Memo
Toggle the scroll key up or down to display
“TIME/TEXT” in the LCD screen on the
remote. Then press down on the scroll key
repeatedly until the Disc Memo appears at the
bottom of the screen.
Notes
• During playback, do not turn off the player by
pressing POWER on the player. Doing so may
cancel the settings. When you turn off the player,
press x first to stop playback and then press [/1 on
the remote. After the power indicator lights up in red
and the player enters standby mode, press POWER
on the player.
• You can label up to 200 discs. When you have the
player store over 200 discs in memory, each new
Disc Memo erases the oldest Disc Memo from those
first stored.