Table of Contents
Advertisement
SARA-G3 series - System Integration Manual
On all such carriers, no synchronization is possible
The client can configure the number of minimum disturbing carriers and the power level threshold by using
the AT+UCD command [2].
The jamming condition is cleared when any of the above mentioned statements does not hold.
The congestion (i.e. jamming) detection feature can be enabled and configured by the +UCD AT
u-blox AT Commands Manual
command (for more details refer to the
[2]).
UBX-13000995 - R06
Objective Specification
System description
Page 77 of 218
Advertisement
Table of Contents
