u-blox SARA-G3 Series System Integration Manual page 35

Figure 10Figure 10 roughly describes the current consumption profile of SARA-G350 modules or the
current consumption profile of SARA-G300 / SARA-G310 modules when their EXT32K input is not fed
by a signal (left unconnected), when power saving is disabled: the module is registered with the network,
active-mode is maintained, and the receiver and the DSP are periodically activated to monitor the paging
channel for paging block reception.
Current [mA]
60-120 mA
100
50
15-18 mA
0
Paging period
Current [mA]
0.47-2.12 s
100
50
15-18 mA
0
Figure 10: VCC current consumption profile versus time of the SARA-G350 modules or the SARA-G300 / SARA-G310 modules (with the
EXT32K input pin not fed by any
the active-mode is always held, and the receiver and the DSP are periodically activated to monitor the paging channel
UBX-13000995 - R06
SARA-G3 series - System Integration Manual
60-120 mA
20-40 mA
RX DSP
Enabled Enabled
ACTIVE MODE
32 kHz signal), when registered with
Objective Specification
Time [s]
15-18 mA
Time [ms]
the network, with power saving
System description
Page 35 of 218
disabled: