u-blox SARA-G3 Series System Integration Manual page 181

For SARA-G310 and SARA-G350 modules: "Contains FCC ID: XPYSARAG350" resp.
The IC Label shall in the above case be visible from the outside, or the host device shall bear a second
label stating:
For SARA-G310 and SARA-G350 modules: "Contains IC: 8595A-SARAG350" resp.
Canada, Industry Canada (IC) Notices
This Class B digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B) and RSS-210.
Operation is subject to the following two conditions:
this device may not cause interference
o
this device must accept any interference, including interference that may cause undesired
o
operation of the device
Radio Frequency (RF) Exposure Information
The radiated output power of the u-blox Wireless Module is below the Industry Canada (IC) radio
frequency exposure limits. The u-blox Wireless Module should be used in such a manner such that the
potential for human contact during normal operation is minimized.
This device has been evaluated and shown compliant with the IC RF Exposure limits under mobile
exposure conditions (antennas are greater than 20 cm from a person's body).
This device has been certified for use in Canada. Status of the listing in the Industry Canada's REL
(Radio Equipment
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng
Additional Canadian information on RF exposure also can be found at the following web address:
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
IMPORTANT: Manufacturers of portable applications incorporating the SARA-G310 / SARA-G350
modules are required to have their final product certified and apply for their own FCC Grant and Industry
Canada Certificate related to the specific portable device. This is mandatory to meet the SAR
requirements for portable devices.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
Canada, avis d'Industrie Canada (IC)
Cet appareil numérique de classe B est conforme aux normes canadiennes CAN ICES-3 (B)/NMB-3(B) et
RSS-210.
Son fonctionnement est soumis aux deux conditions suivantes:
cet appareil ne doit pas causer d'interférence
o
cet appareil doit accepter toute interférence, notamment les interférences qui peuvent affecter son
o
fonctionnement
Informations concernant l'exposition aux fréquences radio (RF)
La puissance de sortie émise par l'appareil de sans fil u-blox Wireless Module est inférieure à la limite
d'exposition aux fréquences radio d'Industrie Canada (IC). Utilisez l'appareil de sans fil u-blox Wireless
Module de façon à minimiser les contacts humains lors du fonctionnement normal.
Ce périphérique a été évalué et démontré conforme aux limites d'exposition aux fréquences radio (RF)
d'IC lorsqu'il est installé dans des produits hôtes particuliers qui fonctionnent dans des conditions
d'exposition à des appareils mobiles (les antennes se situent à plus de 20 centimètres du corps d'une
personne).
UBX-13000995 - R06
SARA-G3 series - System Integration Manual
List) can be found
Objective Specification
at the following web address:
Approvals
Page 181 of 218