BMW G 650 GS 2010 Rider's Manual page 89

Press bulb 2 into socket and
install by turning clockwise.
Insert inside end of lens into
light housing and close.
Install screw 1.
Replacing tail light and
brake light bulb
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Make sure that the motorcycle is
steady on its stand.
Make sure ground is level and
firm and park motorcycle.
Switch off ignition.
Remove two screws 1 and
take off tail light lens.
Press bulb 2 into socket and
turn counterclockwise to re-
move.
8
87
z