2.5 Minimum safety clearances (Inflammable materials :
1 m
min.
0,6 m
min. (*)
(*) For minimum 20° inclination
Where safety clearances cannot be respected, heat-protection must be provided above heater.
2.6 Inclination of heaters
In all cases, slope "P" or inclination "I" must be at least 10°.
Always install the automatic ignition block (BA block) in low position.
Lateral inclination "I".
BA BLOCK
IN LOW POSITION
Longitudinal inclination "P".
BA BLOCK
IN LOW POSITION
HEATED
AREA
HEATED AREA
= 70°C)
max
2 m
1 m
min.
Min.
HORIZONTAL
HORIZONTAL
P = 0°
I = 10 to 35°
I = 0°
P = 10 to 35°
7