Unpacking And Checking Of Equipment; Fixing Of Heaters - SBM SX Series Installer's Instructions

2.3 Unpacking and checking of equipment

 Check the type and quantities of equipment against your order.
 Check that packing and equipment are intact.
If this is not the case, register a complaint to this effect with the carrier.
 Check gas type and pressure to be used on heaters.

2.4 Fixing of heaters

 Minimum recommended safety heights:
MINIMUM COMFORT HEIGHTS : refer to the specific SBM study for each project.
 Examples of fixtures to be supplied by the installer:
FOR TYPE B6, B8, B10, B12 and B16 SX HEATERS
Steel tube 3/4"
(not supply by SBM)
Anchoring plate
(not supply by SBM)
Fixed regulator + valve
(not supply by SBM)
RP3
(supplied by SBM)
MODEL
B6-SX
B8-SX
B10-SX
B12-SX
B16-SX
B20-SX / B20-2SX
B24-SX / B24-2SX
B32-SX / B32-2SX
B64-2SX
MIN HEIGHT (m)
3.00
3.10
3.20
3.40
3.60
3.80
4.10
4.50
5.50
SBM infrared heater
5