ABB PSTX Series Installation And Commissioning Manual page 20

3.1.5 Softstarter overview
Change the settings through Keypad and Fieldbus
communication.
Use the keypad to change settings for each parameter
alone or as a selection of default parameters for different
applications.
Most parameters have one possible setting, but some
parameters have extra settings for sequence start. The
default parameter settings are stored in the unit for a
reset to default.
When the fieldbus communication is selected, most
parameters can also be changed from this interface.
Overview, See Figure 3.1.
3
Supply voltage Us
Order code
Technical data
according to
IEC 60 947-4-2
Technical data
according to UL 508
Anybus
connection
(Com1)
Figure 3.1
Softstarter overview
20 Description | Installation and commissioning manual |
Terminal marking of
control circuits
1L1 3L2
L N
100-250V
50/60 Hz K4 K5 K6
Ready (Green)
Ready
Run
Run (Green)
Com1
2T1 4T2
Fieldbus plug adapter
connection (Com2)
Motor side connection
1SFC132081M0201
5L3
Screen
Start Stop In0 In1 In2 DGND GND +24V
PSTX
Protection
Fault
Com2
6T3
Symbol for
Torque control
Terminal marking of
control circuits
Line side connection
Protection (Yellow)
Fault (Red)
Keypad
Mini USB
Country of origin
Utilization code
Approvals