Settings For The Display (Screen Setup) - Sony DVP-NC615 Operating Instructions Manual

Settings for the Display
(SCREEN SETUP)
Choose settings according to the TV to be
connected.
Select "SCREEN SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" on page 61.
The default settings are underlined.
The on-screen displays differ depending on
the player model.
Example: Asian/Oceanian models
SCREEN SETUP
TV TYPE:
COLOR SYSTEM:
SCREEN SAVER:
BACKGROUND:
TV TYPE
Selects the aspect ratio of the connected TV
(4:3 standard or wide).
4:3 LETTER Select this when you connect a
BOX
4:3 screen TV. Displays a wide
picture with bands on the upper
and lower portions of the
screen.
4:3 PAN
Select this when you connect a
SCAN 4:3 screen TV. Automatically
displays the wide picture on the
entire screen and cuts off the
portions that do not fit.
16:9
Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
16:9
Depending on the DVD, "4:3 LETTER BOX" may
AUTO
be selected automatically instead of "4:3 PAN
ON
JACKET PICTURE
SCAN" or vice versa.
Asian/Oceanian models only)
Selects the color system when you play a
VIDEO CD.
AUTO
PAL
NTSC
Notes
• You cannot change the color system for DVDs.
• You can change the color system of this player
according to the connected TV. See page 16.
The screen saver image appears when you
leave the player in pause or stop mode for 15
minutes, or when you play back a CD or
DATA CD (MP3 audio) for more than 15
minutes. The screen saver will help prevent
your display device from becoming damaged
(ghosting). Press H to turn off the screen
saver.
ON
4:3 LETTER BOX
4:3 PAN SCAN
16:9
Note
COLOR SYSTEM (VIDEO CD only; For
Outputs the video signal in the
system of the VIDEO CD,
either PAL or NTSC. If your
TV is the DUAL system, select
AUTO.
Changes the video signal of an
NTSC VIDEO CD and outputs
it in the PAL system.
Changes the video signal of a
PAL VIDEO CD and outputs it
in the NTSC system.
SCREEN SAVER
Turns on the screen saver.
63
c continued