Step 2: Connecting The Audio Cords - Sony DVP-NC615 Operating Instructions Manual

Step 2: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
Components to be connected
TV
• Surround effects: TVS DYNAMIC (page 48),
TVS WIDE (page 48)
Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 48)
or
MD deck/DAT deck
• Surround effects: none
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 66)
AV amplifier (receiver) with a digital input jack
having a Dolby Digital, MPEG audio or DTS**
decoder and 6 speakers
• Surround effects: Dolby Digital (5.1ch) (page 66),
DTS (5.1ch) (page 67), MPEG audio (5.1ch)
(page 67)
* Manufactured under license from Dolby
Laboratories. "Dolby," "Pro Logic," and the
double-D symbol are trademarks of Dolby
Laboratories.
** "DTS" and "DTS Digital Out" are trademarks
of Digital Theater Systems, Inc.
20
through .
A D
Connection
(page 21) Example
A
(page 22) Example
B
(page 23) Example
C
(page 24) Example
D
Your setup