Sony DVP-NC615 Operating Instructions Manual page 26

Cd/dvd player
Hide thumbs Also See for DVP-NC615:
Table of Contents

Advertisement

7
Press X/x to select the setting that
matches your TV type.
If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 63)
If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 63)
8
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
YES
NO
9
Press X/x to select the type of jack
(if any) you are using to connect to
an amplifier (receiver), then press
ENTER.
Choose the item that matches the audio
connection you selected on pages 21 to
24 (
through
A
A
• If you connect just a TV and nothing
else, select "NO." Quick Setup is
finished and connections are complete.
B-1
C-1
• Select "LINE OUTPUT L/R
(AUDIO)." Quick Setup is finished and
connections are complete.
B-2
C-2
• Select "DIGITAL OUTPUT." The Setup
Display for "DOLBY DIGITAL" appears.
10
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 22 to
24 (
through
B
26
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
).
D
D
).
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
B-2
C-2
• D-PCM (page 66)
D
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 66)
11
Press ENTER.
"DTS" is selected.
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
12
Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
Choose the item that matches the audio
connection you selected on pages 22 to
24 (
through
B
B-2
C-2
• OFF (page 67)
D
• ON (only if the amplifier (receiver) has
a DTS decoder) (page 67)
13
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
For Asian/Oceanian models only:
If your AV amplifier (receiver) has an
MPEG audio decoder, adjust "MPEG"
setting (page 67).
OFF
STANDARD
DOLBY SURROUND
ON
D-PCM
D-PCM
DOLBY DIGITAL
OFF
STANDARD
DOLBY SURROUND
ON
D-PCM
OFF
OFF
ON
).
D

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvp-nc615bDvp-nc615s

Table of Contents