Hookups; Hooking Up The Player; Step 1: Connecting The Video Cords - Sony DVP-NC615 Operating Instructions Manual

Hookups

Hooking Up the Player

Follow Steps 1 to 4 to hook up and adjust the settings of the player.
Before you start, disconnect the power cords, check that you have all of the supplied accessories,
and insert the batteries into the remote (page 15).
Notes
• Plug cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.

Step 1: Connecting the Video Cords

Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns A through C, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver).
TV, projector or AV
amplifier (receiver)
to LINE OUT (VIDEO)
CD/DVD player
l : Signal flow
18
Audio/video cord
(yellow)
(supplied)
(yellow)
Component video
cord (not
supplied)
(green) (blue)
S VIDEO cord
(not supplied)
(green)
(blue)
(red)
TV, projector or AV
amplifier (receiver)
(red)
TV, projector or AV
amplifier (receiver)