Additional Operations - Sony DVP-NC615 Operating Instructions Manual

be connected to the digital jack of the
player.
• Set the sound to "STEREO" using the
AUDIO button when you play DTS sound
tracks on a CD (page 46).
• Do not play DTS sound tracks without first
connecting the player to an audio
component having a built-in DTS decoder.
The player outputs the DTS signal via the
DIGITAL OUT (COAXIAL) jack even if
"DTS" in "AUDIO SETUP" is set to "OFF"
in the Setup Display (page 67), and may
affect your ears or cause your speakers to be
damaged.
Notes on playing DVDs with a DTS sound
track
• DTS audio signals are output only through
the DIGITAL OUT (COAXIAL) jack.
• When you play a DVD with DTS sound
tracks, set "DTS" to "ON" in "AUDIO
SETUP" (page 67).
• If you connect the player to audio
equipment without a DTS decoder, do not
set "DTS" to "ON" in "AUDIO SETUP"
(page 67). A loud noise may come out from
the speakers, affecting your ears or causing
the speakers to be damaged.

Additional operations

LOAD
DISC SELECT
To
Select a disc
Stop
Pause
Resume play after
pause
Go to the next disc
Go to the next chapter,
track, or scene in
continuous play mode
Go back to the
previous chapter,
track, or scene in
continuous play mode
Stop play and remove
the disc
Replay the previous
scene (DVD only)
Check if a disc is in
the disc compartment
./>
H X x A
DISC SKIP
Operation
Press DISC SELECT
1–5 on the player
Press x
Press X
Press X or H
Press DISC SKIP
Press >
Press .
Press Z
Press REPLAY
Press LOAD on the
player.
The disc number
indicators on the front
panel display (1–5)
light up.
c continued
29