Charging The Battery Pack - Sony DVP-FX811K Operating Instructions Manual

Portable cd/dvd player
Table of Contents

Advertisement

Charging the battery pack

1
Attach the battery pack to the player (page 12).
2
Connect the AC adaptor to the player, and then connect the AC power cord into a wall
outlet (page 11).
HOLD
PHONES
A
B
Player
When charging begins, the CHARGE indicator turns on.
When charging ends, the CHARGE indicator turns off.
3
After charging is finished, disconnect the AC power cord from the wall outlet and
remove the AC adaptor.
To check the battery level
When the player is stopped, a battery indicator is displayed on the screen. Recharge the battery,
when
is displayed or the CHARGE indicator flashes.
The battery indicator is not displayed when a DVD or JPEG file are being played. Stop the player
and check the battery level.
Charging time and maximum playing time
Charging time (with the player turned off) Playing time (with the display turned on)
Approx.
6 hours
* This is the indication of the longest continuous playback on the following conditions.
– normal temperature (20°C (68°F))
– Headphone Use
– Set Backlight Adjustment to the Minimum
– Set "Digital Output" to "Off" in "Audio Setup."
Battery condition may reduce operating time.
Notes
• The battery indicator does not appear on the screen when the AC adaptor is used or when inputting from
external sources.
• Charging times may differ from that indicated above due to conditions of use, environment, and other
factors. The recommended charge up surrounding temperature is in the 10-30°C (50-86°F) range.
DC IN 9.5 V jack
AUDIO
VIDEO
LINE SELECT
IN
OUT
DC IN
OPTICAL
9.5V
OUT
Battery pack
Full
CHARGE indicator
POWER
Exhausted
Approx.
6 hours*
CHARGE
13

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Dvp-fx811

Table of Contents