Sony DVP-FX811K Operating Instructions Manual page 35

Connecting to an AV amplifier (receiver)
Example 1
PHONES AUDIO VIDEO
OPTICAL
A B OUT
To send analog audio signal to an AV amplifier (receiver)
1
Set the LINE SELECT switch on the player's right side to "OUT."
* The yellow plug is used for video signals (page 34).
Example 2
PHONES AUDIO VIDEO
OPTICAL
A B OUT
To send digital audio signal to an AV amplifier (receiver)
1
Set the LINE SELECT switch on the player's right side to "OUT."
2
Set "Digital Output" to "On" in "Audio Setup" (page 30).
LINE SELECT IN OUT DC IN
9.5V
To AUDIO
Audio/video cord (supplied)
LINE SELECT IN OUT DC IN
9.5V
To OPTICAL OUT
Optical digital cord (not supplied)
Stereo amplifier
To AUDIO input
Amplifier with Dolby Digital
or DTS decoder
To AUDIO input
35
,continued