Controlling Your Tv Or Av Receiver (Amplifier) With The Supplied Remote - Sony DVP-CX860 Operating Instructions Manual

Controlling Your TV or AV Receiver (Amplifier) with the
Supplied Remote Z
By adjusting the remote signal, you can control your TV
or AV receiver (amplifier) with the supplied remote.
Controlling TVs with the remote
Set the TV/DISC
BROWSER/DVD
switch to TV.
1 2 3
Number
4 5 6
buttons
7 8 9
0
-/--
A B C
FILE SORT EDIT
1
Slide the TV/DISC BROWSER/DVD switch to TV.
2
Hold down ?/1, and enter your TV's manufacturer's
code (see the table) using the number buttons.
3
Release ?/1.
Code numbers of controllable TVs
If more than one code number is listed, try entering them
one at a time until you find the one that works with your
TV.
Manufacturer Code number
Sony (default) 01
Grundig 11
Hitachi 24
Loewe 45
Nokia 15, 16, 69
Panasonic 17, 49
Philips 06, 07, 08
Saba 12, 13
Samsung 22, 23
Sanyo 25
Sharp 29
Telefunken 36
Thomson 43
Toshiba 38
1/u
MEGA TIME
D ALL
DVD CD
LOAD
Notes
• If you enter a new code number, the code number previously
entered will be erased.
• When you replace the batteries of the remote, the code number
may be reset to the default setting. Reset the appropriate code
number.
Controlling the TV
When you set the TV/DISC BROWSER/DVD switch to
TV, you can control your TV using the buttons below.
Set the TV/DISC
BROWSER/DVD
switch to TV.
1 2 3
Number buttons
4 5 6
7 8 9
-
0
-/--
A B C
FILE SORT EDIT
ENTER
By pressing
You can
?/1 Turn the TV on or off
TV/VIDEO
Switch the TV's input source between
the TV and other input sources
TV/DVD*
Switch the TV's input source between
the TV and CD/DVD player
VOL
Adjust the volume of the TV
PROG
Select the program position of the TV
WIDE MODE
Switch to or from the wide mode of a
Sony Wide TV
Number buttons
Select the program position of the TV
and ENTER
* If you connect the player to the TV via the SCART (EURO AV)
connectors, the input source for the TV is set to the player
automatically when you start playback or press any button
except for ?/1. In this case, press TV/DVD to return the input
to the TV.
Notes
• Depending on the TV, you may not be able to control your TV
or to use some of the buttons above.
• If you use number buttons to select the TV's program position,
press - followed by the number buttons for two-digit
numbers.
1/u
VOL
PROG
TV/VIDEO
MEGA TIME
WIDE MODE
D ALL
DVD CD TV/DVD
LOAD
ENTER
77