Sony DAV-DZ380W Operating Instructions Manual page 90

unit (page 91), "(PAIRING)" appears beside ID in
the front panel display.
To set the ID of the surround
amplifier
1
Make sure that the SURROUND
SELECTOR switch of the surround
amplifier is set to SURROUND.
2
Set the S-AIR ID switch of the surround
amplifier to match the ID (A, B, or C) of
the unit.
3
Press POWER on the surround
amplifier.
When sound transmission is established,
the POWER / ON LINE indicator of the
surround amplifier turns green.
For details of the POWER / ON LINE
indicator, see "To check the transmission
status" (page 35).
To set the ID of the S-AIR
receiver
Refer to the operating instructions of the S-AIR
receiver.
To use multiple S-AIR main units
You can use multiple S-AIR main units by
setting a different ID for each component.
S-AIR main unit
(This unit)
ID A
ID A
S-AIR sub unit
90
GB
Other S-AIR
main unit
ID B
ID A ID B
S-AIR
S-AIR sub unit
sub unit
Enjoying the system's sound in
another room
For the S-AIR receiver
You can enjoy the system's sound by using the
S-AIR receiver. The S-AIR receiver can be
placed in another room for enjoying the
system's sound there.
For details of the S-AIR receiver, refer to the
operating instructions of the S-AIR receiver.
1
Press SYSTEM MENU.
2
Press X/x repeatedly until "S-AIR
MODE" appears in the front panel
display, then press
3
Press X/x to select the desired setting.
• "PARTY": The S-AIR receiver outputs
sound according to functions set on the
unit.
• "SEPARATE": You can set the desired
function for the S-AIR receiver while unit
functions do not change.
4
Press .
The setting is made.
5
Press SYSTEM MENU.
The system menu turns off.
6
Select the desired function on the
S-AIR receiver.
x When "PARTY" is set
The S-AIR receiver's function changes
sequentially as you press FUNCTION +/–
of the main unit (page 39) or S-AIR CH of
the S-AIR receiver.
x When "SEPARATE" is set
The S-AIR receiver's function changes
by pressing S-AIR CH of the S-AIR
receiver as follows.
"MAIN UNIT" t "TUNER FM" t
"DMPORT" t "AUDIO" t ...
To enjoy the same function as the unit,
select "MAIN UNIT."
or c.