Sony DAV-DZ380W Operating Instructions Manual page 37

5
Press X/x to select a language, then
press .
The Setup Display for selecting the aspect
ratio of the TV to be connected appears.
VIDEO SETUP
TV TYPE:
LINE:
PAUSE MODE:
6
Press X/x to select the setting that
matches your TV type, then press
• [16:9]: For a wide-screen TV or a 4:3
standard TV with a wide-screen mode
(page 64)
• [4:3 LETTER BOX] or [4:3 PAN SCAN]:
For a 4:3 standard TV (page 64)
The Setup Display for selecting the output
method for video signals from the EURO
AV T OUTPUT (TO TV) jack on the rear
panel of the unit appears.
VIDEO SETUP
TV TYPE:
LINE:
PAUSE MODE:
7
Press X/x to select the output method
for video signals, then press
• [VIDEO]: Outputs video signals.
• [RGB]: Outputs RGB signals.
Note
• If your TV does not accept RGB signals, no
picture appears on the TV screen even if you
select [RGB]. Refer to the operating instructions
supplied with your TV.
16:9
16:9
4:3 LETTER BOX
4:3 PAN SCAN
.
16:9
VIDEO
VIDEO VIDEO
VIDEO RGB
.
The Setup Display for the Control for
HDMI function appears.
HDMI SETUP
HDMI RESOLUTION:
CONTROL FOR HDMI:
VOLUME LIMIT:
YC C /RGB(HDMI):
B R
AUDIO(HDMI):
JPEG RESOLUTION:
8
Press X/x to select the setting, then
press .
• [OFF]: The Control for HDMI function is
set to off.
• [ON]: The Control for HDMI function
(page 73) is set to on.
The Setup Display for selecting the speaker
formation appears.
SPEAKER FORMATION
STANDARD
9
Press C/c to select the speaker
formation image as the speakers are
actually positioned, then press
For details, see "Getting Optimal Surround
Sound for a Room" (page 94).
10
Connect the calibration mic (supplied)
to the A.CAL MIC jack on the front
panel.
Set up the calibration mic at ear level using
a tripod, etc. (not supplied).
The front of each speaker should face the
calibration mic, and there should be no
obstruction between the speakers and the
calibration mic.
AUTO
(1920x1080p)
OFF
OFF
ON
OFF
SD
.
37
GB