Step 4: Performing The Quick Setup - Sony DAV-DZ380W Operating Instructions Manual

To attach the cover to the
surround amplifier
After connecting and setting, you can attach the
cover to the surround amplifier for organizing
and storing excess speaker cords.
1
Attach the speaker cord cover by
sliding it down along the grooves at the
edges of the surround amplifier.
Surround amplifier
Grooves
Push the speaker cord cover down until you
hear a click. Turn the surround amplifier
upside down, then store the cords in the
speaker cord cover.
2
Insert the tabs of the speaker cord
holder in the slots of the speaker cord
cover, and press it into place.
Surround amplifier
m
36
GB
Speaker cord cover
Speaker cord holder
Step 4: Performing the
Quick Setup
Follow the Steps below to make the basic
adjustments for using the system.
Displayed items vary depending on the area.
C/X/x/c,
1
Turn on the TV.
2
Press [/1 on the unit, and POWER on
the surround amplifier.
Note
• Make sure that the function is set to "DVD"
(page 39).
3
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
[Press [ ] to run QUICK SETUP.]
ENTER
appears at the bottom of the TV screen. If
this message does not appear, recall the
Quick Setup display (page 38).
4
Press without inserting a disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
"/1
DISPLAY
ENGLISH
ENGLISH
FRENCH
SPANISH
PORTUGUESE