Adjusting The Interior Fittings; Adjusting The Door Shelf / Bottle Shelf; Adjusting The Bottle Holder; Moving The Shelves - Miele K 32222 i Operating And Installation Instructions

Adjusting the door shelf /
bottle shelf
 Push the door/bottle shelf upwards,
then remove it by pulling it forwards
 Replace the door/bottle shelf at the
required position. Ensure that it is
securely pushed back into position.

Adjusting the bottle holder

The bottle holder can be moved left or
right to create more room for drink
cartons.
The bottle holder can be removed
completely (e.g. for cleaning):
 Push the bottle shelf upwards, then
remove it by pulling it forwards
 Pull the bottle holder upwards to
remove it from the rear edge of the
bottle shelf.

Adjusting the interior fittings

Moving the shelves

The shelves can be adjusted according
to the height of the food.
 Raise the shelf, and pull it forwards
slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.
The raised edge on the protective strip
at the back must face upwards to
prevent food from touching the back of
the appliance and freezing to it.
Stoppers prevent the shelves from
being dislodged by mistake.
29