Audio Settings - Sony BDP-S550 Operating Instructions Manual

YCbCr/RGB (HDMI)
Sets the color setting for video signals output
from the HDMI OUT jack. Select the setting
that matches the connected TV type.
Auto
YCbCr (4:2:2) Outputs YCbCr 4:2:2 video
YCbCr (4:4:4) Outputs YCbCr 4:4:4 video
RGB (16-235) Select this when connecting
RGB (0-255)
x.v.Color Output
Sets whether to send xvYCC information to
the connected TV.
Combining xvYCC-compatible video with a
TV that supports x.v.Color display makes it
possible to more accurately reproduce object
colors present in the natural world.
Auto
Off
Pause Mode
Sets the picture mode for DVD playback
pause status. For BD-ROMs or discs
containing AVCHD files, "Pause Mode"
automatically switches to "Auto."
Auto
Frame
46
Automatically detects the
connected TV type, and
switches to the matching
color setting.
signals.
signals.
to a device that only
supports RGB limited range.
Select this when connecting
to an RGB (0-255) device.
Normally select this.
Select this when the picture
is unstable or colors appear
unnatural.
Normally select this.
Dynamic moving pictures
appear without blurring.
Displays static pictures at
high resolution.

Audio Settings

The default settings are underlined.
Audio Output Priority
Selects the jack type to output audio signals.
2-channel linear PCM signals are output at
48 kHz maximum from output jacks other
than the priority jacks.
HDMI Outputs audio signals from
the HDMI OUT jack.
Coaxial/ Outputs audio signals from
Optical the DIGITAL OUT
(OPTICAL/COAXIAL)
jack.
Multi Channel Select this when connecting
Analog an AV amplifier (receiver)
via the MULTI CHANNEL
OUTPUT jacks.
Stereo Analog Outputs audio signals from
the LINE OUT (AUDIO L/
R) jacks.
Speaker Settings
To obtain the best possible surround sound,
set the speakers you have connected and their
distance from your listening position.
Then use the test tone to adjust the volume
and the balance of the speakers to the same
level.
This setting is selectable when "Audio
Output Priority" is set to "Multi Channel
Analog."
To set the speakers
1
Select "Speaker Settings" in "Audio
Settings," and press ENTER.