Table of Contents
Advertisement
To mount the device in a 19-inch rack using mounting brackets:
1.
Attach the two mounting brackets (supplied) to each side of the device's
chassis, using the supplied screws, as shown in the figure below:
Figure 4-3: Attaching the Mounting Brackets
2.
Place the device on a pre-installed shelf in the rack.
3.
Attach the ends of the mounting brackets (that you installed in Step 1)
to the vertical track of the rack's frame, using standard 19-inch rack bolts (not
supplied).
5
Cabling the Device
This chapter describes the cabling of the device.
5.1
Grounding and Surge Protection
The device must be connected to earth (grounded) using an equipment-earthing
conductor.
The equipment is classified as Class I EN60950 and UL60950 and must be
earthed at all times.
For Finland: "Laite on liltettava suojamaadoituskoskettimilla varustettuun
pistorasiaan."
For Norway: "Apparatet rna tilkoples jordet stikkontakt."
For Sweden: "Apparaten skall anslutas till jordat uttag."
Protective Earthing
Grounding and Power Surge Protection
Advertisement
Table of Contents
