1
Introduction
This document provides a hardware description of the DW-GTW-AC-E1060 (hereafter
referred to as device) and step-by-step procedures for mounting and cabling the
device.
The device supports the following interfaces:
● 2 E1/T1 port interfaces.
● 4 FXS port interfaces
● 4 Gigabit Ethernet ports
2
Package content
Follow the procedure below for unpacking the carton in which the device is shipped.
● DW-GTW-AC-E1060
● Four anti-slide bumpers for desktop installation
●
One FXS Lifeline cable adapter
● Two mounting brackets for 19-inch rack mounting
● One AC power cable
3
Physical Description
This section provides a physical description of the device.
3.1 Physical Dimensions and Operating Environment
The device's physical dimensions and operating environment are listed in the table
below:
Table 3-1: Physical Dimensions and Operating Environment
Physical Specification
Dimensions (H x W x D)
Weight
Environmental
MTBF
Description
1U x 32 x 34.5 cm (12.6 x 13.6 inches)
2.5 kg (5.5 lbs.)
Operational: 5 to 40°C (41 to 104°F)
Storage: -25 to 85°C (-13 to 185°F)
Humidity: 10 to 90% non-condensing
238,834