Table of Contents
Advertisement
the TrunkLifeLineType parameter (PSTN Fallback upon power outage is done
by default).
5.3
Connecting to a Computer for Serial
Communication
The device provides an RS-232 serial interface port on its front panel for serial communication with a
PC.
·
Port Type: RJ-45
·
Cable: RJ-45 to DB-9
To connect the device's serial interface to a computer:
a.
Connect the RJ-45 cable connector to the device's serial port, labeled CONSOLE.
b.
Connect the other end of the cable to the COM1 or COM2 RS-232 communication port on your
PC.
5.4
Powering up the Device
The device receives power from a standard alternating current (AC) electrical outlet. The connection is
made using the supplied AC power cord.
Physical Specification
Input Voltage
AC Input Frequency
AC Input Current
Max. Power Consumption
Warnings:
·
The device must be connected to a socket-outlet providing a protective earthing
connection.
·
Use only the AC power cord that is supplied with the device.
Figure 5-19: Cabling Serial Interface (RJ-45)
Table 5-3: Power Specifications
Value
Single universal AC power supply 100 to 240V
50 to 60 Hz
1.5 A
Gateway (without OSN): 60W*
Advertisement
Table of Contents
