Table of Contents
Advertisement
To connect the device to the power supply:
1.
Connect the line socket of the AC power cord (supplied) to the device's AC power
socket (labeled 100-240V ~ 4A 50-60Hz), located on the rear panel.
2.
Connect the plug at the other end of the AC power cord to a standard electrical
outlet.
Once you have cabled and powered-up the device, the POWER LED on the front panel lights up green.
6
Maintenance – Replacing the Power
Fuse
The device contains a fuse that protects the device from excessive current. The fuse is located on the
rear panel, below the power socket. To replace the fuse, use only one of the following fuses described
in the table below:
Manufacturer
BEL
CONQUER
LITTEFUSE
Caution
For continuous protection, replace only with the same fuse type and rating fuse.
Figure 5-21: Connecting to the Power Supply
Table 6-1: Allowed Fuses for the Device
Manufacturer Part Number
5ET2.5-R
UDL 2.50
021302.5MXP
Advertisement
Table of Contents
